FUELTECH INJECTORS

FUELTECH INJECTORSThe FT Injector is compatible with any ECU available on the market and an 8A 2A Peak and Hold injector driver required. FEATURES The FT Injector is available in two versions of 520 lb h (~5,000cc min) and 720 lb h (~7,000cc min) at 90psi base fuel pressure. Can be used as low as 30psi base fuel pressure flowing 301lb h and 422lb h respectively and up to 130psi base fuel pressure flowing 614lb h (~5,800cc min) and 860lb h (~8,200cc min) respectively.

The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required.

FEATURES

The FT Injector is available in two versions of 520 lb/h (~5,000cc/min) and 720 lb/h (~7,000cc/min) at 90psi base fuel pressure. Can be used as low as 30psi base fuel pressure flowing 301lb/h and 422lb/h respectively and up to 130psi base fuel pressure flowing 614lb/h (~5,800cc/min) and 860lb/h (~8,200cc/min) respectively.

Each FT Injector is made with the best available materials, including internal components resistant to corrosion, allowing them to be used with any fuel, from gasoline, ethanol to nitromethane, nitropropane and even fuels containing MTBE and ETBE. EV1 type connector for positive locking and high vibration resistance.

TECHNICAL DESCRIPTION

Specifications:

• Compatible with any type of fuel
• Low impedance (requires 8A/2A injector driver)
• Voltage: 12V to 24V
• Coil resistance 1.5 Ohms

Dimensions:

• Module: 3.39 x 1.26 inches
  
• Packaging: 8.78 x 6.38 x 2.36 inches

Contents of packaging:

• 1 FT Injector(s)
• 1 Owner's manual

Warranty: 

• Worldwide: 1 year

***Price listed is per injector***